Other Products
Other Products
SCT-Panasonic
The SCT-Panasonic units are designed for use with a Panasonic DVR or matrix switcher and can be used with a Panasonic
WJ-HD316, WJ-SX550, or WJ-SX850.
| SCT-Panasonic-8-Pelco RS-422 | Converts Panasonic RS-485 camera control code into Pelco RS-422 control code for up to eight PTZs. Pelco output addresses can be offset from the input addresses in multiples of eight. |
| SCT-Panasonic-8-Pelco-NVTI | Converts Panasonic RS-485 control code into Pelco RS-422 code for up to eight PTZs with additional NVTI output capability. Output addresses can be offset from input addresses in multiples of eight. |
| SCT-Panasonic-8-Javelin | Converts Panasonic RS-485 control code to Javelin RS-232 code for up to eight Javelin JO308 type ACUs. Output addresses can be offset from input addresses in multiples of eight. |
| SCT-Panasonic-16-Pelco | Converts Panasonic RS-485 control code to Pelco RS-422 control code for up to sixteen PTZs. Output addresses can be offset from input addresses in multiples of sixteen. |
Coaxitron Translators
Our SCT-CRX coaxitron translators detect Pelco coaxitron control code and convert it to the desired output code for a single PTZ.
As these are a relatively new development, we only have the following available at this time.
| SCT-CRX-Pelco-Pelco | Translates Pelco coaxitron control code to Pelco RS-422 control code |
| SCT-CRX-Pelco-Vicon | Translates Pelco coaxitron control code to Vicon RS-422 control code |
| SCT-CRX-Pelco-Relay | Detects Pelco coaxitron control code and converts auxiliary commands to operate two relays |
SCT-200 Series
The SCT-200 products translate the input code and send the output code to two or more cameras on the same pan/tilt unit.
| SCT-200-AD-QS-Gemineye | Converts AD manchester code to Quickset RS-422 code for one or two camera addresses (for Quickset Gemineye with stepper drive) |
| SCT-200-Panasonic-QS-Gemineye | Converts Panasonic RS-485 to Quickset RS-422 for two camera addresses (for Quickset Gemineye with stepper drive) |
| SCT-200-Pelco-Quickset | Converts Pelco RS-422 to Quickset RS-422 for two camera addresses |
| SCT-200-Pelco-QS-Gemineye | Converts Pelco RS-422 to Quickset RS-422 for two camera addresses(for Quickset Gemineye with stepper drive) |
| SCT-200-Bosch232-TASS | Converts Bosch RS-232 to TASS RS-422 for one or two cameras |
| SCT-200-Vicon-Pelco | Converts Vicon RS-422 to Pelco RS-422 for two camera addresses |
Specialty Items
| SCMT-200-AD-Kybd | Merges converted AD keyboard data with AD manchester into a single AD manchester output |
| SCT-Pelco-7-Visca | Converts Pelco camera control code to Sony Visca RS-232 code for seven Sony cameras connected in daisy chain configuration |
| SCT-100-AD232-Pelco | Converts AD RS-232 control code to Pelco RS-422 for a single PTZ. |
| SCT-100-Bosch232-Pelco | Converts Bosch RS-232 camera control code to Pelco RS-422 code for a single PTZ. |
| SCT-100-Pelco-Quickset-ltc550ir | Single output translator that converts Pelco RS-422 control code to Quickset RS-422 with special code for LTC 550 cameras. |
| SC-100-ASCII-Pelco | Single camera unit that translates Pelco ASCII protocol to Pelco RS-422 code. |
| Mailing Address: Sennetech Inc. 6455 W. Bath Rd. Perry, MI 48872 USA |
Phone: (517) 675-1150 Fax: (517) 675-1151 Email: info@sennetech.net |
Copyright © 2008 Sennetech Inc.
Last modified: May 27, 2009